USE OF MODERN INFORMATION TECHNOLOGIES FOR THE DEVELOPMENT OF A COMPLEX ELECTRODE INSTRUMENT

The relevance of the study is due to the need to simplify the technology of manufacturing an electrode tool for electrical processing methods. In this regard, this article is aimed at revealing the possibilities of using modern computer-aided design tools and rapid prototyping technologies. In this regard, as an approach to the study of this problem is the development of an algorithm for the implementation of a composite electrode tool based on additive technologies that allows to consider the possibility of using modern technologies in order to reduce the cost and simplify the technology of manufacturing a combined electrode tool for single and small-scale production. The article presents a technique for designing and manufacturing a combined electrode tool based on the capabilities of modern CAD systems and programming languages embedded in them as a tool for monitoring parametric parameters of machine-building production using the example of designing and manufacturing an electrode tool for electrical processing methods, the regularities of the parameterization of the electrode-tool with the help of modern CAD systems are revealed and the technology of its manufacturing with the use of additive technologies is described .The materials of the article are of practical value for the enterprises of the machine-building complex in connection with the simplification of the process of manufacturing the electrodetool for electrical processing methods and its reduction in cost.

1. Kuzovkin AV Development of the technology for manufacturing the shaped tool on the basis of rapid prototyping / AV Kuzovkin, AP Suvorov // Bulletin of the Voronezh State Technical University. - Volume 10. - No. 1. - 2014. pp. 35-37.

2. Suvorov AP, Kuzovkin A.V. Use of additive technologies in the production of shaped surfaces / A.P. Suvorov, A.V. Kuzovkin // Bulletin of the Rybinsk State Aviation Technological Academy. P.A. Solovyov. 2017. No. 2 (41). Pp. 9-15.

3. Суворов А. П. Проектирование комбинированного инструмента для обработки сложнопрофильных поверхностей / А. П. Суворов, А. В. Кузовкин // Вестник Брянского государственного технического университета. – 2016. – № 5 (53). – С. 16-22.

4. Kuzovkin, A., "Technological Capabilities of Combined and Additive Processes in Forming the Flowing Surfaces of Hydraulic Equipment," AV Kuzovkin, GA Sukhochev, AO Rodionov, AP Suvorov. Pumps. Turbines. Systems. - Voronezh, 2014. - No. 1 (10). - pp. 53-60.

5. Suvorov AP Technique of manufacturing a composite electrode tool with rapid prototyping technology / AP Suvorov, AV Kretinin, AV Kuzovkin // Vestnik Voronezh State Technical University. - 2015. - Vol. 11. –No. 2. - pp. 11-14.

6. Zelenina A. N. Principles of modeling and prototyping of a part pin / A.N. Zelenin, Yu. D. Yaitskikh // Science and education in life modern society. - 2015 .-- S. 82-85.