Научный журнал Моделирование, оптимизация и информационные технологииThe scientific journal Modeling, Optimization and Information Technology
cетевое издание
issn 2310-6018

THE ENERGY ANALYSIS NC PROGRAMM FOR MACHINING CENTER

Salnikov V.V.   Franzuzova Y.V.  

UDC 621.311
DOI: 10.26102/2310-6018/2019.25.2.019

  • Abstract
  • List of references
  • About authors

The paper considers an approach to the energy analysis of control programs (up) for multi-purpose machines (MCS) with a numerical control system (CNC), the purpose of which is to assess the efficiency of energy consumption when it is performed on a certain equipment. Describes the General approach to programming of CNC systems with the help of ISO-7bit. The description of the grammar of ISO7Bit language is presented with the help of metacharacters for constructing the syntactic and lexical analyzers of the text of the control program on its basis. Considered the authors developed software for analysis of control programs with the goal of getting out of the text up the contour of the workpiece, cutting speed and feed in each point of the trajectory, and calculation of the data obtained cutting power and chart your energy consumption by machine drives system. To demonstrate the capabilities of the developed software, an analysis of the control program obtained at the enterprise of the Tula region was made. As a result, a number of measures are proposed to improve the energy efficiency of its implementation: reducing the "irrational" idle tool strokes and optimizing the feed value at the time of processing the "depression". Directions for further modernization of the developed software are shown.

1. On some measures to improve energy and environmental efficiency of the Russian economy: the decree of the President of the Russian Federation No. 889 dated June 04, 2008 // meeting of the legislation of the Russian Federation. 2008. No. 23. article 2672.

2. The state program of the Russian Federation "energy Saving and energy efficiency improvement for the period up to 2020": approved by the order of the Government of the Russian Federation dated December 27, 2010 № 2446- R // Collection of legislation of the Russian Federation. 2011. No. 4. article 622.

3. The state program of the Russian Federation "energy Efficiency and energy development": approved by the order of the Government of the Russian Federation dated April 3, 2013 № 512-p // Collection of legislation of the Russian Federation. 2013. No. 14. article 1739

4. Report on the implementation of the state program "energy Efficiency and energy development" // Ministry of energy of the Russian Federation [Electronic resource]. 2017. Mode of access: https://minenergo.gov.ru/system/download/323/85150 (date accessed: 18.06.2019)

5. Report on the implementation of the state program "energy Efficiency and energy development" // Ministry of energy of the Russian Federation [Electronic resource]. 2018. Mode of access: https://minenergo.gov.ru/system/download/323/96991 (date accessed : 18.06.2019)

6. Industry of Russia. 2012: Stat.SB. / Rosstat. - M., 2012.

7. Ivanov V. A. Analysis of energy consumption in various industries // online journal "SCIENCE" Volume 7, №1 (2015) http://naukovedenie.ru/PDF/144TVN115.pdf (access is free). Tit. from the screen. Yaz. fair-haired. English. DOI: 10.15862/144TVN115

8. Salnikov V. S. Technological bases of effective energy consumption of production systems. – Tula: Publishing house “Tula polygraphist”, 2003. – 187

9. Salnikov V. V., Frantsuzova V. the Energy performance of certain objects of industrial enterprises // Izvestiya of Tula state University. Technical science. Issue 10. – Tula: Tulgu, 2018. P. 108 – 113.

10. Erzin O. A., Salnikov V. V. One of the aspects of assessment of efficiency of technological systems // Izvestia of the Tula state University. Technical science. Issue 11 part 2. – Tula: Tulgu, 2014. P. 594 – 603.

11. Performance and quality management: Modular program: Per. with ang. /Ed. by I. Prokopenko and K. North: In 2H,–Part I. –M.: Case, 2001. – 800C.

12. Fedorov A. A., Rothan E. M. power Supply of industrial enterprises. –M.: Energy, 1981. –360C.

13. Epoetin A. N., Salnikov V. V. the Role of information technology in providing efficient energy enterprises // Izvestiya of Tula state University. Technical science. Issue. 8: at 2 h. 1. Tula: Izd-voTulgu, 2017. – p. 165 – 170.

14. Salnikov V. V., Epotin A. N., Frantsuzova V. Computer support use of energy resources in the production system // Izvestiya of Tula state University. Technical Sciences, Vol. 6. Tula: Izd-voTulgu, 2018. – p. 106 – 114.

15. Salnikov V. V. Mathematical model of energy consumption of industrial equipment // Intelligent and information systems: Materials of the International scientific and technical conference / Tula state University. – Tula, 2017. – p. 221 – 224.

16. Savnikov V. V. Computer based support for efficient use of energy in manufacturing // Proc. 7th Mediterranean Conference on Embedded Computing (MECO) 2018, pp. 565-568.

17. ISO 6983-1:2009 (Part 1) Automation system and integration. Numerical control of machines. Program format and definition of address words: Data format for positioning, line motion and contouring control systems // ISO, Geneva

18. Numerical control devices for Metalworking equipment: GOST 20999-83. – Official publication. – M.: IPK Publishing house of standards, 1983. – 28 p

Salnikov Vladimir Vladimirovich

Email: vladimirsalnikov95@yandex.ru

Tula State University

Tula, Russian Federation

Franzuzova Yulia Vyacheslavovna
Candidate of Technical Sciences
Email: julianna_1204@mail.ru

Tula State University

Tula, Russian Federation

Keywords: efficiency, energy use efficiency, energy efficiency program operating iso7bit, iso7bit

For citation: Salnikov V.V. Franzuzova Y.V. THE ENERGY ANALYSIS NC PROGRAMM FOR MACHINING CENTER. Modeling, Optimization and Information Technology. 2019;7(2). Available from: https://moit.vivt.ru/wp-content/uploads/2019/05/SalnikovFrantsuzova_2_19_1.pdf DOI: 10.26102/2310-6018/2019.25.2.019 (In Russ).

97

Full text in PDF