Методика подбора режимов резания на основе контроля средней толщины стружки
Работая с нашим сайтом, вы даете свое согласие на использование файлов cookie. Это необходимо для нормального функционирования сайта, показа целевой рекламы и анализа трафика. Статистика использования сайта отправляется в «Яндекс» и «Google»
Научный журнал Моделирование, оптимизация и информационные технологииThe scientific journal Modeling, Optimization and Information Technology
Online media
issn 2310-6018

A technique for selecting cutting conditions based on the control of average chip thickness

Urmanov M.D.   idKhusainov R.M. Khisamutdinov R.M.  

UDC 519.876.5
DOI: 10.26102/2310-6018/2023.42.3.004

  • Abstract
  • List of references
  • About authors

Managing the pace of production is a relevant issue for a modern enterprise. It is necessary to select cutting tools and cutting conditions according to a given schedule. Errors in the production process can lead to huge time and money costs. The main goal of this paper is to provide a flexible algorithm that will allow the user to select the optimal combination of cutting conditions in compliance to the production rate. The algorithm being developed also helps to quickly respond to errors that occur during the production process. The theoretical model shows the user the risks when using a particular pace of work. The technologist will be able to make a decision independently while taking as a basis data on the tool life and productivity. The presented algorithm is based on the control of the average chip thickness. This makes it possible to describe the theoretical “cutting pattern” for any pair of tool and workpiece material. The paper presents a comparative analysis of the algorithm and tabular values of cutting modes. Following on from this analysis, it is apparent that the representation obtained by the technique used in this paper helps to analyze in more detail the rationality of choosing certain cutting modes.

1. Urmanov M.D. Evaluation of the effectiveness of the use of a tool calculator when milling on a CNC machine. Materials of the International Scientific and Technical Conference "Innovative Engineering Technologies, Equipment and Materials – 2019" (IRTC-"IMTOM-2019"). 2019;1(2):138–141. (In Russ.) (accessed on 25.03.2023).

2. Urmanov M.D., Khusainov R.M., Khisamutdinov R.M. Search for the optimal area of cutting conditions based on the simulation of cutting tool wear. Modeling, Optimization and Information Technology. 2021;9(3). URL: https://moitvivt.ru/ru/journal/pdf?id=965. DOI: 10.26102/2310-6018/2021.34.3.030. (In Russ.) (accessed on 25.03.2023).

3. Parfenyeva I.E. Technology of construction materials. Moscow, Uchebnoe posobie; 2009. 84 p. (In Russ.).

4. De Vos P. Development of mathematical models of chip thickness during milling. URL: https://tverdysplav.ru/razvitie-matematicheskih-modelej-tolshhiny-struzhki-obrazuyushhejsya-pri-frezerovanii/ (In Russ.) (accessed on 25.03.2023).

5. Urmanov M.D., Khusainov R.M., Khisamutdinov R.M. A technique for maintaining an average chip thickness when milling with different milling widths. In: Technological innovations and scientific discoveries. Collection of scientific articles based on materials of the XII International Scientific and Practical Conference. 2023:153–156. (In Russ.).

6. De Vos P. Mathematical models allow efficient calculation of tool life. URL: https://tverdysplav.ru/matematicheskie-modeli-pozvolyayut-effektivno-rasschityvat-stojkost-instrumenta/ (In Russ.) (accessed on 01.05.2023).

7. Walter. General directory. URL: https://docs.steelcam.org/walter/obshij-katalog-2017-page483 (In Russ.) (accessed on 01.05.2023).

8. Letyagina A.S., Serebrennikova A.G. Dependence of productivity Q and cutting power Pc on cutting conditions when turning titanium alloy VT20. In: Youth and science: Relevant issues of basic and applied research. Materials of the II All-Russian National Scientific Conference of students, postgraduates and young scientists. 2019:102–104. (In Russ.).

9. Bezyazyachny V.F., Averyanov I.N., Kordyukov A.V. Calculation of cutting modes. A textbook. Rybinsk, RGATA; 2009. 185 p. (In Russ.).

10. Lobanov D.V., Yanyushkin A.S., Rychkov D.A., Petrov N.P. Organization of tool facilities in the processing of composite materials. STIN. 2010;1(11):2–4. (In Russ.).

Urmanov Marat Danilovich

Email: marat.urmanov@mail.ru

Kazan (Volga Region) Federal University

Naberezhnye Chelny, The Russian Federation

Khusainov Rustem Mukhametovich
Candidate of Technical Sciences Assistant Professor


Kazan (Volga Region) Federal University

Naberezhnye Chelny, The Russian Federation

Khisamutdinov Ravil Mirgalimovich
Doctor of Technical Sciences Associate Professor

Kazan (Volga Region) Federal University

Naberezhnye Chelny, The Russian Federation

Keywords: optimal tool wear, chip thickness, feed per tooth, theoretical cutting force, specific cutting force, net cutting force

For citation: Urmanov M.D. Khusainov R.M. Khisamutdinov R.M. A technique for selecting cutting conditions based on the control of average chip thickness. Modeling, Optimization and Information Technology. 2023;11(3). Available from: https://moitvivt.ru/ru/journal/pdf?id=1378 DOI: 10.26102/2310-6018/2023.42.3.004 (In Russ).


Full text in PDF

Received 14.05.2023

Revised 20.06.2023

Accepted 11.07.2023

Published 12.07.2023